Matching
|
|
|
a. | power
off | c. | bend
knees | b. | equipment problems | d. | safety device | | | | |
|
|
|
1.
|
Blade
guard
|
|
|
2.
|
Making
equipment adjustments
|
|
|
3.
|
Lifting
object from the floor
|
|
|
4.
|
strange
noises
|
|
|
a. | metal | e. | injury | b. | cutting material | f. | broom/dustpan | c. | paper
towel | g. | stock | d. | off | h. | running | | | | |
|
|
|
5.
|
Never
remove sawdust or cuttings by hand while the machine is ____________.
|
|
|
6.
|
When
finished with a machine, remove the _________ and wait until the blade or cutter has come to a
complete stop.
|
|
|
7.
|
Use
available safety guards on power equipment. However, it should be understood that using safety
guards does not necessarily prevent ____________.
|
|
|
8.
|
Make all
adjustments with the _____________ _____________ and the machine at a dead
stop.
|
|
|
9.
|
When
cleaning a work surface, use a ________________ to do so.
|
Short Answer
|
|
|
10.
|
Describe
the proper way to remove sawdust or cuttings from the cutting head.
|
|
|
11.
|
Give one
example of what might happen if you ignore the regulation “Do not try to free a stalled blade
before turning the power off.”
|
|
|
12.
|
Describe at least two scenarios where getting long hair or loose
clothing caught in a tool will likely lead to serious injury.
|
|
|
13.
|
Name five
things that can cause eye injury in the work area. Name one practice that would prevent most
eye injuries in the work area.
|
|
|
14.
|
If a
person has experience with a powered miter saw but has never used a sliding compound miter saw, what
should they do before using the tool?
|
|
|
15.
|
Explain
two ways an extension cord can be dangerous if not intentionally managed both during use and while
not in use?
|
|
|
16.
|
Explain why one should never push directly towards the
working blade or bit.
|
|
|
17.
|
Why should the number of people in the work area be kept
to a minimum when using tools?
|
True/False
Indicate whether the sentence or statement is true
or false.
|
|
|
18.
|
Leaving
tools or pieces of stock lying on the table surface of a machine being used is NOT a good thing
to do.
|
|
|
19.
|
It is ok
to talk or interrupt anyone who is working on a machine
|
|
|
20.
|
Always
walk, do not run in the MVHS Tech Lab
|
|
|
21.
|
When
changing cutters, blades, or sandpaper on any machine, unplug the machine
|
Multiple Choice
Identify the
letter of the choice that best completes the statement or answers the question.
|
|
|
22.
|
When using
tools for set-up work on a machine, a. | keep the tool in a safe condition | c. | all of the above | b. | keep the tool in a
safe place | d. | select the right tool
for the job | | | | |
|
|
|
23.
|
Strange
machine noises or faulty operation means that a. | your machine has something wrong with it and you should report the
problems to the instructor. | c. | the bearings need a
drop of water | b. | your machine is telling you it’s
ok | d. | the extension cord is
not long enough | | | | |
|
|
|
24.
|
Good
housekeeping in the MVHS Tech Lab means: a. | materials and equipment are put where they
belong | c. | scraps and rubbish
are disposed of daily to prevent fires and reduce hazards | b. | all of the
above | d. | walkways are clear of
tools, materials, and debris | | | | |
|
|
|
25.
|
When using
a cutting tool, keep your eyes focused a. | on the clock | c. | on where the cutting action is taking place | b. | on the girl/boy
working next to you | d. | on what is going on
around you | | | | |
|
|
|
26.
|
An
accident is often caused by: a. | all of the above | c. | not using safety gaurds/glasses | b. | rushing what you are
doing | d. | running too small a
pieces of stock through the machine | | | | |
|